All FlorLIFT's are designed to give you years of trouble-free, reliable service from the minute they are installed. All FlorLIFT units can be custom designed to suit your needs.

FlorLIFT sells, installs, services, and maintains our products both in the US and worldwide. Call us today for a free, no obligation quote on your current project!

 

​

For Residential, Commercial, and Industrial Buildings...

• Provides Safe, Secure Floor-to-Floor Mobility. 

• Each FlorLIFT Designed to Meet ADA and ANSI Requirements.

• A Quality Conveyance Shipped Knocked Down Easy to Assemble on the Job

​

​​​

-FLORLIFT MULTI-LEVEL MODEL SPECIFICATIONS:

​

​​​

​

​​

​

​

​​

​

​

​​

​

​

​

​

​

​

​​​

-FLORLIFT HANDICAP/WHEELCHAIR MODEL SPECIFICATIONS:  MODEL FL-105

​

Anyone who is confined to a wheelchair, can now have the freedom and the convenience to move from one floor to another easily without the aid of any other person. Be free to come and go as you please...

• Transport from first floor to basement in 15 seconds

• Capacities range up to 1,000lb. and travel heights up to 18ft. with complete safety

• Custum built to fit your individual needs

• Totally Enclosed Lifts

• Designed and engineered to meet rigid safety standards, Florlift totally enclosed lifts are the low-cost solution to providing safe and easy movement of people or materials from floor to floor.  Easily installed, the lifts require minimum space and no extensive supplementary construction. 

•  For Residential & Commercial use, Nursing Homes, Public Buildings

• Provides Safe, Secure Floor-To-Floor Mobility for Invalids and Wheelchair Patients

• A Quality Conveyance

​

General Specifications:

• FlorLIFT multi-level handicapped lift

• Model number ML-102-TE-(FS or Btw)

• Rated capacity: 500 or 750 lbs

• Lifting/Lowering speed: 15 FPM

• Controls on a 24 volt safety circuit one cab station.  Power on-off keyswitch/raise lower pushbutton/light on-off keyswitch/push pull type stop alarm.

• Power on-off keyswitch.  Call only pushbutton.  All control is a constant pressure type (Deadman) per code in NEMA 1 type enclosure.

​

Standard & Safety Features:

• Platform deck falling safety device

• Slack chain safety switch

• Two (2) steel roller suspension chains

• Upper and lower limits switches

• Intermediate landing transfer switch(s)*

• Mechanical fixed over-run stops

• Hydraulic overload protection

• Emergency lowering device

• Roof, hatch, light, and alarm

• Side thrust cam rollers

• Low pressure hydraulic design with 8000 lb. burst strength hose

• Adjustable lowering flow control valve at base of hydraulic ram

• Wall brackets with hardware*

• Remote pumping unit and controller*

• Unit cleaned and finished painted with machinery enamel electrostatically applied

*If Applicable

​

Designed and manufactured to meet rigid safety standards.  FlorLIFT Multi Level totally enclosed lifts are the low cost solution to provide safe and easy movement of the handicapped from one floor to another.  Easily installed.  The lifts require minimum space and no extensive supplementary construction.  FlorLIFT Multi-Level complies with ANSI & ASME code A17.1 (LU/LA) "Limited Use/Limited Application" section 2000 for vertical rising handicapped lifting devices.  When placing an order FlorLIFT will prepare detailed drawings for your approval depicting exactly the general specifications required to suit the application including modifications or special features that might be needed.

​

FlorLIFT MULTI-LEVEL handicapped lift is a hydraulically driven totally enclosed, vertical lifting device on a cantilevered platform used to provide secure, economical and safe transportation for handicapped persons from one floor to another.  Designs can incorporate service from simple two-level structures up to any number of multilevel applications as permitted. Each Multi-Level handicapped lift is individually designed to meet your unique application whether its use will be in new construction or in renovating an existing building.  FlorLIFT can solve your handicapped accessibility needs. 

​

The INTRICATE MAST FRAME, which can be either Free-Standing or Bolt to Wall, is constructed of electrically welded heavy structural steel.  Any application that requires travel of more than six feet will have bolt type splice section to reduce overall mast height for shipping and ease of installation.

​

FS - Free-Standing means that the structural mast frame will be designed to support cab reactions imposed by the platform cab and its load.

​

BTW - Bolt-To-Wall means the structural mast frame will be designed to support cab reactions; however, pull-out forces at the wall brackets necessitate construction at the load bearing wall strong enough to accommodate the reactions imposed thereon.  

​

The PLATFORM CARRIAGE travels within the mast frame rails.  Four (4) solid steel guide wheels with sealed roller bearings and side thrust cam rolls are useful for efficient and smooth operation.

​

The PLATFORM DECK intricately bolts to the carriage.  This aids in shipment and installation.  The support legs are structural steel channel with a heavy gauge steel sheet deck.

​

The PLATFORM CAB encloses the deck on the sides and top.  The cab comes standard with a hatch and light.  Entrance/exit can be on one, two, or three sides.  (See cab configurations.)  Protection at the openings is by an EZY-Roll folding gate equipped with an electrical interlock (to prevent operation of unit if open).  Standard construction cab designs are available, such as wood paneling, Formica/Wilson Art panels, egg crate roof, special railings or ornamental trim.

​

Each Multi-Level handicapped lift is individually designed to meet your unique application whether its use will be in new construction or in renovating an existing building.  FLORLIFT can solve your handicapped accessibility needs. 

​

​The HYDRAULIC DRIVE SYSTEM raised or lowers the platform cab.  This is achieved via a positive displacement, full rod, hydraulic ram.  The Carriage is suspended by two (2) independent steel roller chains riding over a heavy duty, sprocketed equalizing head assembly.  The design is a 2:1 ratio so that the platform's travel is twice the cylinder stroke.  This design allows the ram to be completely housed within the mast frame, thus eliminating the need for a costly submerged plunger or deep pit.  The hydraulic pumping unit is completely self-contained and remote, operating on 115/208/230 volt, single phase.  The system utilizes state of the art components for sale, trouble-free operation.  Since the hydraulic ram is single acting, the pump-motor is only to run in the rising mode.  Lowering is a gravity function and is accomplished simply by opening a solenoid valve.  The internal check valve will hold the cab firm at landings.  In the event of a power failure, the built in emergency lowering device can be used to safely lower the cab.    

​

The ELECTRICAL CONTROLLER and landing stations control the rising and lowering of the platform cab.  The main controller houses the magnetic contactor, control relays, and transformer.  All controls operate on a 24 volt AC safety circuit.  Standard cab station for a two (2) level application will be key switch controlled on/off pushbutton operated up/down/stop/alarm flush type mounted on the back cab panel.  Landing stations are key switch controlled on/off push-button operated call only for flush mounting.  All control functions are constant pressure (deadmen).  Included are upper and lower terminal limit switches.  Many optional controls and stations are available, such as multi-level call and send, automatic self-maintained, illuminated buttons, etc.

​

The FALLING DECK SAFETY DEVICE is a standard feature on all FlorLIFT Multi-Level Lifts.  In the unlikely event that both suspension chains were to become slack or brake simultaneously, the quick acting safeties, which are two (2) independent serrated braking cams, will engage, driving the hardened teeth deep into the mast rails holding the platform cab in place.

​

The SLACK CHAIN LIMIT SWITCH is another standard safety device incorporated into the Multi-Level Lift.  If either or both suspension chains become slack, the limit switch will close the lowering solenoid holding the ram in place not allowing it to bottom out. 

​

Multi-Level Pumping Unit Requirements: Generally, it is recommended that the electric/hydraulic pumping unit be located at the lower level behind the mast frame bearing wall.  However, if the application requires an alternate location, the pumping unit can be located anywhere within the location of the shaft.  Note: Hydraulic feed lines from the base of the hydraulic ram and pumping unit greater than 10'-0" will need to be hard piped.  

​

Multi-Level Electrical Requirements:  Standard lifts operate on a 1 HP dual voltage single phase motor and require a main feed disconnect.  For best efficiency it is recommended that the motor's high voltage be used.  A secondary line on 115 Volt 15-amp dedicated breaker is also needed for the lowering solenoid, alarm bell, and cab lighting.  Note: Electrical control [panel can be shipped loose for wall mounting. shipped loose for wall mounting. 

​​

​​​

-VERTICAL CONVEYOR RECIPROCTING SPECIFICATIONS:

​

• Sequence of Operations for Vertical Reciprocating Conveyors that Comply with ANSI/ASME B 20.1

• FlorLIFTs are constructed with all steel framework and platform designed in accordance with conservative engineering practices. 

• FlorLIFT raises and lowers a steel platform with ball bearing steel roller wheels in guided 4" steel channels - using a single acting hydraulic ram coupled to an electric pumping unit, using two lifting chains alloy hardened heavy duty single strand roller chain. 

​

​​​​

-MATERIAL LIFT MODEL SPECIFICATIONS:  MODEL FL-102 / FL-103

​

Our vertical reciprocating conveyor is installed under ANSI/ASME b 20.1 - Under the code, there is no riding switch.  Riding the conveyor shall be forbidden to all personnel.  Warning signs to this effect should be prominently posted at each point of access and at each point of operation.  The sequence of operation is as follows. The operator can call or send the unit to any floor from outside the shaftway only.  No riders or personnel are allowed to ride a VRC B20.1 device.  All doors are equipped with electro-mechanical interlocks.  If shaftway doors are open, the unit will not operate.  If a folding gate is provided, the folding gate is provided with an electrical limit switch.  If the doors or gates are open, the unit will not operate until all doors and gates are closed or locked.  The pumping unit must be installed outside the shaftway.  In the event of complete power failure, the pumping unit is equipped with a hand lowering valve so the unit can be lowered to the lowest point.  The emergency hand lowering valve is to be used only in the event of power failure. This VRC has been approved as a material lift under B 20.1 ANSI/ASME in most states.  All FlorLIFTs are custom-made to suit your needs in regard to platform size, height and special equipment.    ​

​

OPERATION OF UNIT:  Push the button, motor pumps oil and lifts cylinder.  Push the down button, oil returns to tank and lift descends to first floor.  Each chain travels over two steel sprockets that are mounted in a leveling cross head and attached to the cylinder; this crosshead levels the lifting platform.  The chains are welded to the cylinder rises, the chains pull the platform to the desired height. 

​

CONTROLS: Controls are either constant pressure or momentary contact call and send.  One control at each level is either call or call and send with lighted switches.

​

POWER:  208/230 single phase or 3 phase 60 HZ.​

​

​​​SLACK CHAIN SWITCHES:  To prevent accidents, we installed an electrical slack chain switch.  As the lift descends, if the chain slacks one inch, the slack chain shuts off the power and the cylinder and the lift stops immediately.  Push the up button and the lift will rise and whatever is obstructing the unit underneath has to be removed and then the lift will work properly again.  Then and only then will it descend.

​

PLATFORM SAFETY FALLING DEVICE:  If the slack chain switch fails, then the platform safety falling device comes into action.  Should both chains break simultaneously, the slack chain switch would not work, but when the chains break, the lift will fall about 3 or 4 inches.  The platform safety device is mounted on the lifting platform carriage.  It has self-generating type cams, spring loaded and have machine hardened teeth which rapidly engage the mast uprights, dig in hard and deep and hold the lifting platform and prevent the load from falling.

​

LIFTING CHAIN:  Two single-strand, alloy, hardened, heavy duty, and roller.  LIFTING TYPE are each capacities to sustain many times total rated load capacity of lifter.  Chains attached at one end at OUTER EDGES OF LIFTING PLATFORM to provide extra load stability, are mounted over chain LOAD ROLLERS carried in an equalizing type RAM CROSS HEAD and at the other ends are attached to MAIN FRAMEWORK with adjustable anchor TAKE-UPS.  Each chain is capable of supporting the entire load and has an ultimate breaking strength of 7,000 lbs. each - a total of 14,000 lbs. 

​

HOSE:  Hose leading from pumping unit to the cylinder has a bursting strength of 7,000 lbs.

​

FOLDING GATES:  Manually operated.  At each entrance or exit is a folding gate.  Gate is equipped with an electrical mechanical switch.  Lift will not operate if gates are open. 

​

SAFETY FLOW VALVE:  Safety flow valve is mounted at the bottom of the cylinder and adjusts the descending speed of the lift.  Attached to this is a hose that goes to the pumping unit.  Should the hose break or develop a leak, the safety flow valve keeps the lift from falling and descends at the rate of 15 feet per minute.  Hand lowering valve - In the event of power failure, the lift can be let down by a hand lowering valve on the pumping unit. 

​

SAFETY RELIEF VALVE:  The unit is designed to lift between 750 to 1000 lbs.  If the lift is overloaded, it will not go up until the proper weight is reached. 

​

SAFETY DOOR LOCKS:  At each opening, there will be an electric door lock which prevents the door from opening until the platform has reached that height.  Should the door be left open, the lift will not leave that floor until the door is closed. 

​

LIMIT SWITCHES:  The unit is equipped with upper and lower limit switches to prevent over-travel.  The hydraulic cylinder is also designed to prevent over travel.

​

HAND LOWERING VALVE AND PUMPING UNIT:  FlorLIFT is equipped with a hand lowering valve to be used only in an emergency.  If power is lost, the hand lowering valve is used to lower the lift to the lowest floor.  The pumping unit must be remote and placed outside the shaftway for easy access to use the hand lowering valve or any electrical repair.  No one should be under the lift when using the hand lowering valve.

​

Safety Advantages:​

• Platform safety device prevents free fall

• In the event of loss of power, the lift can be lowered by means of a hand lowering valve

• A flow control valve located at the cylinder base will lower the lift at 15 FPM if the oil line is cut

• Overload relief valve in hydraulic circuit prevents operation of lift if it is loaded above rated capacity

• Mechanical stops prevent the lift from raising above a predetermined height

• Trapdoor-safety mats optional 

​

​Features:

• Frame and platform, all structural steel and plate, electric welded construction

• Capacity Range - 1,000 lbs. to 20,000 lbs.

• Platform raised heights to 60 feet

• Electric/Hydraulic power unit

• Lifts over 35' raised height will be electric/cable driven

• Controls - Many options to choose from

• Standard automatic safety devices positively prevent platform from falling

• Side thrust roller device standard for platform stability under unbalanced loads

• Only a 5" to 12" pit required, depending on capacity and platform size

​

Options Available Upon Request:

• Safety Enclosures...Gate and Interlocks...Weatherproofing

• Explosion Proof Motors and Controls...Special Platform Configurations

• Full or Partial Cabs...Totally Enclosed Cabs...Double or Incline Masts

• Portable Running Gear

• Consult Factory for Special Application and Engineering Information Such as Storage/Retrieval Systems

• Vertical Reciprocating Conveyor Complies with ANSI B 20.1...Shaftway or Wire Enclosure Required

•  All FlorLIFTs are Designed to Meet Your Needs

• A Versatile Lift for Factories, Warehouses, and Structures with Mezzanines

• Costs 1/3 the price of freight elevators - Does the same job!

​​

​​​​​​​​​​​​​​​

​​-TELESCOPING MORTUARY LIFT SPECIFICATIONS:  MODELS FL-100 / FL-102 / FL-103

​

​FlorLIFT is the only mortuary lift that delivers the casket from one floor level to another without the need of unsightly superstructures.  FlorLIFT raises or lowers heavy caskets where you want them, when you need them most.  Controlled from either floor level by push buttons.  A speedy, safe, one-man operation...no more expensive, part-time help...no more delays waiting for extra help to arrive.  You save all around with a FlorLIFT.​

​​​

Casket Hydraulic Lift Models:

• FL-100-A:  94" - 102" (Floor to Floor Travel​

• FL-100-B:  103" - 120" (Floor/Floor Travel)

• FL-100-C:  121" - 140" (Floor/Floor Travel)

• FL-100-D:  141" - 169" (Floor/Floor Travel)

• ​Contact us for floor/floor travel over 170"...

​

General Specifications:​

• All steel electrically welded construction

• Lift capacity 750 lbs.

• Lift speed 15 F.P.M. power up gravity return

• Controls on 115 volt up-down constant pressure

• Drive mechanism, chains over 2" full bore hydraulic arm

• Standard platform 34" x 90" with a 48" high backguard

• Finish OSHA blue machinery enamel electrostatically applied

• Electric hydraulic 1/2 HP pumping unit on 115/230 volt/single phase/60Hz

• Note: FlorLIFT can be installed in shaftway with swing doors if trapdoor is not used. If pit is not feasible FlorLIFT may be installed directly on floor.  A wood or concrete ramp can be made to suit. The FL-100 can also be designed for dual purpose use.  ADA handicapped/material. 

​

Features:

• Ideal for indoor or outdoor use

• Sidewalk to basement delivery of materials

• Frame and carriage are all electric welded construction for years of reliable service

• Capacity: 1,000 to 8,000 lbs. 

• Lift Speed: 15 ft. per minute

• Power: to suit your needs

• Controls: 115V 60 HZ

• Constant pressure with upper and lower limit switches-other controls available

• Only a 5" to 8" pit required

• Trapdoor can be wood or metal

​

​​Safety Advantages:

• Platform safety device prevents free fall

• In the event of loss of power, the lift can be lowered by means of a hand lowering valve

• A flow control valve located at the cylinder base will lower the lift at 15 FPM if the oil line is cut

• Overload relief valve in hydraulic circuit prevents operation of lift if it is loaded above rated capacity

• Mechanical stops prevent the lift from raising above a predetermined height

• Trapdoor-safety mats optional 

             ​

​

-HYDRAULIC ELEVATORS

​​

Specify FlorLIFT Elevator and you gain the comforting certainty that your building's integrity is complemented with an elevator of superior quality.  FlorLIFT Elevator hydraulic elevator systems are fulfilling vertical transportation needs in thousands of installations nationwide and overseas. 

​

In vertical transportation, uncompromised quality has to be more than a trendy catch=phrase used to help promote a transaction.  Quality is everything, and is the driving force behind FlorLIFT Elevator's approach to hydraulic elevator manufacturing.  Every major component incorporated into our elevator systems has been engineered and qualified in accordance with highest industry standards.  Every part has been job-proven to our satisfaction so it fits integrally in our quality profile.  The result; You experience a trouble-free installation, with assurance it will endure for years to come. 

​

Hydraulic elevator technology has rapidly evolved to its present level and the FlorLIFT Elevator staff has been uniquely positioned on the leading edge of that process.  Application engineering, manufacturing, field installation, modernization, preventative maintenance...All are areas of specialization blended into the backgrounds of the FlorLIFT Elevator team. ​Thus, with this concentration of expertise, you will immediately begin to realize benefits that will help expedite your project and, ultimately, save you money. 

​

Manufacturing hydraulic elevator equipment is our primary focus.  Whether you're moving passengers or a 60,000 lb. tractor trailer, you can get exactly what you want with one of our packages.  The package concept, of course, has been around for years.....as have the limitations many other suppliers attach to them.  Now, however, those stipulations have been reduced significantly through FlorLIFT Elevator's ready adaptability to many types of modifications you may require.  Since all re-engineering and fabrication is carried out on the hardware, you don't have to consider altering construction plans to accommodate the installation. 

​

Customizing a package at FlorLIFT Elevator is a daily event and costs you little in turn-around time.  Because our engineering staff continuously monitors the changes, you are assured of system integrity and the quality of workmanship. 

​

​​

-HOLELESS ELEVATORS

​

With rising wellhole costs, existing building conditions, and increasing environmental concerns, a standard in ground hydraulic elevator may not be feasible for every application. 

​

Over the years, FlorLIFT Elevator has been recognized as a "holeless elevator pioneer."  Models are available to suit every holeless need.  The economical dual single stage design utilizes a standard hoistway size.  The single and multi stage cantilever design can accommodate low to mid rise requirements and can serve front and side openings.  Mid to high rise rope hydraulic design allows travel over one hundred feet without wellhole and without exerting loads on the upper structure of the building.

​

You will find our extensive involvement in holeless technology development invaluable for passenger and freight jobs as well as modernizations.

​​​

​

MORE MODEL SPECIFICATIONS COMING SOON!!

​

​

​

​ FLORLFIT OF NJ, INC. RESERVES THE RIGHT TO CHANGE SPECIFICATIONS AND OR FEATURES​

​